1. #1
    Unregistered

    Issues with the Canon Color printer connected to Mac OS X 10.5.8

    Am able to take the prin through the color printer which is connected to my mac machine running on the OS X 10.5.8, but it takes more than 10 minutes to start the print. Once it is started then it is performing normally but if stopped once then again I need to wait for ten more minutes. The same printer working fine on other Windows machine.

  2. #2
    samerjeet singh Array
    Join Date
    Nov 2012
    Posts
    570

    Re: Issues with the Canon Color printer connected to Mac OS X 10.5.8

    hello guest
    this issue comes due to these reasons:-
    - may be it is not compatible for your device.
    - may be a hardware issue.
    - connection is not proper of printer with your mac.
    - processing error of your mac.


    solution steps for your problem are:-
    - first of all disconnect your printer from your mac.
    - now check its hardware.
    - repair if you found any fault there.
    - now reconnect your printer with your mac.
    - now install all printer drives in your mac.
    - increase processing capcity of your mac.
    - than you will able to use your printer properly

    good bye

  3. #3
    abhinandan Array
    Join Date
    May 2013
    Posts
    270

    Re: Issues with the Canon Color printer connected to Mac OS X 10.5.8

    Hello***********
    User***********
    ++++++++++++Try this method for this issue++++++++

    *********First of all close the printer software if it open of disconnect the printer from mac.

    *********Now move towards the task bar and tap the start up menu.

    *********In start up menu find and tap the control panel.

    *********In control panel you will see the many options.

    *********Among this find and tap uninstall a program option.

    *********After tapping this you will see the all application installed in you mac.

    *********Among this select the printer software and tap install.


  4. #4
    matamanju Array
    Join Date
    Apr 2013
    Posts
    291

    Re: Issues with the Canon Color printer connected to Mac OS X 10.5.8

    Hello Friend

    1.After completing the software installation, you can create a new printer in OS x by selecting print and fax in the system preferences, available from the apple menu.

    2.After you click on print and fax click the + button to add a printer.

    3.in the printer set up utility application will open. at the bottom of the window click the more printers.

    4.The pop up menu at the top of the new window allows you to select the protocol.

    5.Click it and select the canon I P then type in the printer I P address.

    6.Click the add. the printer information will be automatically gathered and you will now see the printer listed in the print and fax preferences pane.

    7.You can add additional canon printers by repeating the steps that follow the driver installation.

  5. #5
    saicharan Array
    Join Date
    Nov 2012
    Posts
    1,054

    Re: Issues with the Canon Color printer connected to Mac OS X 10.5.8

    Hello friend,


    I have the solution for your problem just do as i say..............................

    1.This can be the problem of the virus in your Mac.

    2.So you install the best antivirus software and then use it.

    3.If that is not your problem then this can be the problem of the Printer drivers.

    4.So you try to go to the website of those printer drivers.

    5.And from there you download it and then install them and your problem will be solved now.

    All the best......................................

+ Reply to Thread

Similar Threads

  1. Replies: 0
    Last Post: 25-05-2013, 12:34 AM
  2. Replies: 1
    Last Post: 31-03-2013, 07:09 AM
  3. Replies: 0
    Last Post: 09-03-2013, 05:13 PM
  4. Replies: 0
    Last Post: 20-02-2013, 07:59 PM
  5. Issues with Canon Pixma IP3000 Printer on Mac OS X
    By Unregistered in forum Mac and OSX
    Replies: 0
    Last Post: 26-01-2013, 10:39 PM